# Axis scales **URL:** \ **Category:** W&B Help\ **Created:** [August 10, 2022, 5:44pm UTC](https://community.wandb.ai/t/axis-scales/2892 "2022-08-10T17:44:01Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![erlebacher](https://avatars.discourse-cdn.com/v4/letter/e/bc8723/32.png) [@erlebacher](https://community.wandb.ai/u/erlebacher)\ **Post date:** [August 10, 2022, 5:44pm UTC](https://community.wandb.ai/t/axis-scales/2892/1 "2022-08-10T17:44:01Z")
I have created 100 runs, and would like to make two scatter plots. The first scatter plot involves the first 50 simulations, with axis limits [0,10] in both directions. The second scatter plot uses simulations 51 to 100, with different axis limits, say [10,20]. So far, I created a new panel, for both these plots. But wandb does not like that. Whatever I set the axis limits will be the same for both subsets (1-50, and 51-100). What is the recommended approach to have a plot for each of the data subsets? Must I create two different panels? If so, that means that one panel 2 might have to be turned off for the first batch of data experiments, and panel 1 would be turned off for the second batch of experiments. Is this the recommended approach? Thanks. ---
**Author:** ![ramit\_goolry](https://avatars.discourse-cdn.com/v4/letter/r/85e7bf/32.png) [@ramit\_goolry](https://community.wandb.ai/u/ramit_goolry)\ **Post date:** [August 12, 2022, 10:11pm UTC](https://community.wandb.ai/t/axis-scales/2892/2 "2022-08-12T22:11:24Z")
Hi @erlebacher, Have you tried creating reports with different panel plots? They should work here. Thanks, Ramit ---
**Author:** ![system](https://us1.discourse-cdn.com/flex020/uploads/wandb/original/1X/366b649231631dbab896843020da0056074ac79d.png) [@system](https://community.wandb.ai/u/system)\ **Post date:** [October 11, 2022, 10:12pm UTC](https://community.wandb.ai/t/axis-scales/2892/3 "2022-10-11T22:12:16Z")
This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.